We are excited to share with you at WEFTEC 19 all the new valve products we have been working on for the water and wastewater markets. You may explore some of the models we will feature at our booth on this website and we encourage you to stop by our booth when at the show. BOOTH #5252.

If you would like to discuss a specific valve or application, this year we are scheduling private appointments at our booth. Simply click here to select the day and time that works best for you.

LASTLY- please don’t miss out  for a chance to win a pair of Airpods or an IWatch4 – simply stop by our booth to enter. 

SEE YOU AT WEFTEC, BOOTH #5252

PLUG VALVES

The Flomatic® Flo-E-Centric® plug valves seat and plug face are offset from the shaft centerline to provide tight shut off and wear resistance.

Our plug valves have a specially designed plug moving in and out of the seat with minimal contact, resulting in low operating torque. Flo-E-Centric® plug valves are designed for systems where slurries, grit or solids are present. It is a quarter turn valve allowing cost effective solution with low torque actuation for pump control, shut-off and throttling operation.

N
Meets AWWA C517-09 Standards
N
Fusion Bonded Epoxy Coated Inside and Out
N
Ductile Iron Body ASTM A536 65-45-12
N
Class 150# ANSI B16.5 Flanged Ends
N
Spherical BUNA-N Coated DI Plug
N
Stainless Steel Thrust Bearing

Model 54-0 Flo-E-Centric® Plug Valve With Gear Box  (Direct Mounted Shown Above) – ANSI B16.1 Class 150

AUTOMATIC CONTROL
VALVES

Available in sizes ranging from 3/8″ to 36″ sizes Flomatic’s Automatic Control Valves are US Made, Meet AIS Requirements, and are NSF/ANSI 61 Certified. 

Available in Full Port Globe Style, Reduced Port Globe Style, and Angle Body Styles, all Flomatic Control Valves Come Standard with:

N
Air Bleed Valve
N
Pilot Tubing Isolation Valves
N
Drain Plug
N
Test Cocks
N
Stainless Steel Fasteners
N
Jack Screws
N
Indicator Rod
Shown above, Model C101 Automatic Control Valve

SWING CHECK
VALVES

This year we introduce the new AIS certified Series 92 and 90 Swing Check Valves, up to 30″ in size, manufactured to AWWA C-508 standards.

In addition, this year at WEFTEC 19, we will present new additions to our Flo-Flex® Model 745 family – a rubber disc swing check valve. Flo-Flex® provides the water and wastewater industry one of the broadest line of swing check valves available on the market today. The flange to flange lay length is according to ANSI/AWWA C508-01. and are available in sizes up to 24″.

N
Fusion Bonded Epoxy Coated Inside / Outside
N
Low Headloss
N
Easy In-Line Serviceability
N
Can be installed in vertically or horizontally
N
Reinforced Steel/Ductile Iron Valve Disc
N
Valve Body Flow Area Equal to Nominal Pipe Area
Shown above, Model 745 AIS Compliant Swing Check Valve

SILENT CHECK
VALVES

With a wide range of Silent Check Valves available, this year we are excited to share with you our Wafer Style Model 888VFD and 888S6VFD which can be close coupled with a butterfly valve – the only one of its kind (No spool piece needed). 

The patented 888VFD family, with its unique poppet design insures that the valve operates quietly and efficiently across a wide range of flow velocities. Ideally designed for installations with varying flow rates in VFD controlled pump settings. 

N
Suitable for Direct Mountaing of Butterfly Valves
N
Low Head Loss
N
Ductile Iron and 316SS Models Available
N
Reduces Water Hammer Shock
N
EPDM O-Ring Seal - Drip Tight Closure
N
NSF/ANSI 61 and NSF/ANSI 372
N
Meets AWWA Lay Lenghts
Shown above, Model 888S6VFD Wafer Style, Silent Check Valve

BALL CHECK
VALVES

Flomatic® Valves offers the most complete line of Ball Check Valves made in the United States. This year we are specially proud to introduce our Model 4082  Compliant with the American Iron and Steel Act (AIS).

Flomatic® Ball Check Valves have no moving parts and the ball automatically moves out of the path of flow minimizing head loss and maximizing efficiency. 

N
Low Maintenance Cost
N
Flow Efficient
N
Easy Serviceability
N
Valves that end clogging and are self-cleaning
N
Vacum Relief and Proximity Switch Options Available
N
American Iron and Steel Act (AIS) Models Available

Available Models in Ductile Iron, 316 Stainless Steel, and/or PVC.

Shown above, Model 4082 AIS Compliant, Ball Check Valve

AIR RELEASE
VALVES

Flomatic’s Sewair® Family consist of Air Release Valves constructed of a cast iron body-stainless steel trim and threaded female x female connections with NITRILE (Buna-N) seat.

With a large orifice at top of sewer valve which equals the inlet size, the Sewair® family eliminates vacuum in waste water pipeline. 

N
Meets ANSI/AWWA C517-09
N
Vents large quantities of air when filling pipelines
N
Allows air to re-enter pipeline preventing a vacuum
N
Long body design to prevent solids from coming in
N
Cast Iron Body with Stainless Steel Trim. BUNA-N Seat.
Shown above, Flomatic’s Sewair-Maxi® – Air Release Valve

Flomatic Corporation 
15 Pruyn’s Island Drive Glens Falls, NY 12801

800-833-2040 | WWW.FLOMATIC.COM