Flomatic is a diversified U.S. valve manufacturer producing valve products in sizes ranging from ¼” through 36”, in various types for the Municipal, Industrial, Domestic and Irrigation Markets.

Our valve products are specified and installed in some of the largest water and wastewater projects in the country from the “Big Dig” in Boston, Potable Water and Wastewater systems in New York City, pumping system in Los Angeles to fuel systems associated with the Space Shuttle in Texas and irrigation systems in the heartland of our nation’s farmlands.

 

PLUG VALVES

The Flomatic® Flo-E-Centric® plug valves seat and plug face are offset from the shaft centerline to provide tight shut off and wear resistance.

Our plug valves have a specially designed plug moving in and out of the seat with minimal contact, resulting in low operating torque. Flo-E-Centric® plug valves are designed for systems where slurries, grit or solids are present. It is a quarter turn valve allowing cost effective solution with low torque actuation for pump control, shut-off and throttling operation.

N
Meets AWWA C517-09 Standards
N
Fusion Bonded Epoxy Coated Inside and Out
N
Ductile Iron Body ASTM A536 65-45-12
N
Class 150# ANSI B16.5 Flanged Ends
N
Spherical BUNA-N Coated DI Plug
N
Stainless Steel Thrust Bearing
LEARN MORE

Model 54-0 Flo-E-Centric® Plug Valve With Gear Box  (Direct Mounted Shown Above) – ANSI B16.1 Class 150

AUTOMATIC CONTROL
VALVES

Available in sizes ranging from 3/8″ to 36″ sizes Flomatic’s Automatic Control Valves are US Made, Meet AIS Requirements, and are NSF/ANSI 61 Certified. 

Available in Full Port Globe Style, Reduced Port Globe Style, and Angle Body Styles, all Flomatic Control Valves Come Standard with:

N
Air Bleed Valve
N
Pilot Tubing Isolation Valves
N
Drain Plug
N
Test Cocks
N
Stainless Steel Fasteners
N
Jack Screws
N
Indicator Rod
LEARN MORE
Shown above, Model C101 Automatic Control Valve

SWING CHECK
VALVES

This year we introduce the new AIS certified Series 92 and 90 Swing Check Valves, up to 30″ in size, manufactured to AWWA C-508 standards.

In addition, this year at WEFTEC 19, we will present new additions to our Flo-Flex® Model 745 family – a rubber disc swing check valve. Flo-Flex® provides the water and wastewater industry one of the broadest line of swing check valves available on the market today. The flange to flange lay length is according to ANSI/AWWA C508-01. and are available in sizes up to 24″.

N
Fusion Bonded Epoxy Coated Inside / Outside
N
Low Headloss
N
Easy In-Line Serviceability
N
Can be installed in vertically or horizontally
N
Reinforced Steel/Ductile Iron Valve Disc
N
Valve Body Flow Area Equal to Nominal Pipe Area
Shown above, Model 745 AIS Compliant Swing Check Valve

SILENT CHECK
VALVES

With a wide range of Silent Check Valves available, this year we are excited to share with you our Wafer Style Model 888VFD and 888S6VFD which can be close coupled with a butterfly valve – the only one of its kind (No spool piece needed). 

The patented 888VFD family, with its unique poppet design insures that the valve operates quietly and efficiently across a wide range of flow velocities. Ideally designed for installations with varying flow rates in VFD controlled pump settings. 

N
Suitable for Direct Mountaing of Butterfly Valves
N
Low Head Loss
N
Ductile Iron and 316SS Models Available
N
Reduces Water Hammer Shock
N
EPDM O-Ring Seal - Drip Tight Closure
N
NSF/ANSI 61 and NSF/ANSI 372
N
Meets AWWA Lay Lenghts
LEARN MORE
Shown above, Model 888S6VFD Wafer Style, Silent Check Valve

BALL CHECK
VALVES

Flomatic® Valves offers the most complete line of Ball Check Valves made in the United States. This year we are specially proud to introduce our Model 4082  Compliant with the American Iron and Steel Act (AIS).

Flomatic® Ball Check Valves have no moving parts and the ball automatically moves out of the path of flow minimizing head loss and maximizing efficiency. 

N
Low Maintenance Cost
N
Flow Efficient
N
Easy Serviceability
N
Valves that end clogging and are self-cleaning
N
Vacum Relief and Proximity Switch Options Available
N
American Iron and Steel Act (AIS) Models Available

Available Models in Ductile Iron, 316 Stainless Steel, and/or PVC.

Shown above, Model 4082 AIS Compliant, Ball Check Valve

Flomatic Corporation 
15 Pruyn’s Island Drive Glens Falls, NY 12801

800-833-2040 | WWW.FLOMATIC.COM