Flomatic’s Series 5400 Flo-E-Centric® Plug Valves are energy-efficient, round-port, eccentric, quarter turn plug valves designed in compliance with ANSI/AWWA C517, in a fusion bonded epoxy coated Ductile Iron body.
Designed with a nickel welded seat for long service life, Flomatic Plug Valves are used in a variety of applications where slurries, solids, or grit are present:
Wastewater and Sewage Lines
Pulp and Paper Processing Facilities
Food and Chemical Handling
Wastewater Treatment Plants
Sewage Sludge and Slurry Lines
Mining and Irrigation Applications
FEATURES & BENEFITS
Certified Lead-Free NSF/ANSI 372
Can be used with Bi-Directional Flow
Class 150# ANSI B16.5 Flanged Ends
Coated with NSF/ANSI 61 Fusion Bonded Epoxy
98% Welded Nickel Seat
Stainless Steel Hardware
100% Full Ported (2” - 8”)
90% Ported (10” - 24”)
Spherical BUNA-N Coated Ductile Iron Plug
Size Range: 2”-12” (200 PSI ); 14”-24” (150 PSI)
ANSI B16.1, class 150 Ductile iron Body ASTM A536 65-45-12. Epoxy Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
2″ OPERATING NUT
ANSI B16.1, class 150 Ductile iron Body ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
Additionally, an optional wrench handle for use with a direct 2” operating nut is available
Series 5400 valves are Ductile iron Body Epoxy coated, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing. Mechanical Joint Valves comply with ANSI/AWWA C111/A21.11.
Ductile iron Body ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
Electric actuated plug valve, for open/close service with manual hand-wheel override.
SMART CARD AVAILABLE
FLOMATIC – Smart Card
The Flomatic FDHC-100 is a high performance Digital positioner intended to control AC actuators, providing 450 points of resolution with quarter turn actuators ranging from 2 sec to 120 sec and rated for 25% duty or more.
The FDHC-100 has many automatic advanced features that will enhance any actuator while making it easy to install and set up. The unit can be configured for various command types (4-20 mA, 1-5 V, 0-5 V, 0-10 V, or a digital command) and its default operation upon loss of command. Various option modules are easily plugged into the unit, providing other features such as a position feedback.
MAX PRESSURE: 200 PSI
TEMP MAX: 180F (80C)
SIZES 2″ THRU 24″