NO MATTER HOW COMPLEX

THE APPLICATION

AUTOMATIC CONTROL VALVES

AUTOMATIC CONTROL VALVES

MODEL C & CA

Available in a size range from 1 1/4″ thru 36″, Flomatic Pilot operated control valves are built in compliance with AWWA C530 standards. NSF/ANSI 61 approved fusion bonded epoxy coated ductile iron globe or angle style bodies are available standard in full or reduced port configuration. Valves are fitted with various pilot control systems to control conditions in pressurized pipeline systems.

Flomatic Automatic Control Valves are in full compliance with the American Iron & Steel (AIS) provisions for affected Federal/State Revolving Fund projects, as all iron and steel products are 100% produced in the United States*.

*Consult Factory for Configuration

Specifications

STANDARD FEATURES

N
NSF/ANSI 61 APPROVED
Fusion Bonded Epoxy Inside & Out for Superior Corrosion Resistance. (Consult factory for configuration)
N
PILOT TUBING ISOLATION VALVES STANDARD
For Ease of Maintenance and Service.
N
DRAIN PLUG STANDARD
For Draining During Service or For Seasonal Applications.
N
TEST COCKS STANDARD
For Easy Installation and Removal of Pressure Gauges.
N
ALL SS FASTENERS STANDARD
Superior Corrosion Resistance and Ease of Maintenance.
N
JACK SCREWS STANDARD
For easy removal of bonnet and seat (6” and Up)
N
AIR BLEED VALVE STANDARD
For Releasing Air From Diaphragm Chamber on Startup or After Service.
N
INDICATOR ROD STANDARD (6” and Up)
For Visual Indication of Valve Movement.
N
LOW HEADLOSS
Superior Flow Efficiencies. Higher CV Values. Lower Friction Losses.
N
100% WATER TESTED
All Valves Hydrostatically Tested For Leaks and Proper Operation.

AVAILABLE

CONFIGURATIONS

The Flomatic Model C000/CA000 Main Valve is a self-contained hydraulically operated, single diaphragm-actuated globe or angled body valve with no pilot controls. The valve has three major components: the body with a removable seat, the cover with bushing, and the diaphragm assembly. The diaphragm assembly is the only moving part. The cover forms a sealed chamber above the diaphragm to separate operating pressure from line pressure. Long service life and dependable operation are ensured due to packless construction.

The valve is designed for use with various types of pressure and/or electric controls to provide the desired control of pressure or flow for a variety of water system applications. The Flomatic Model C000/CA000 is the basic valve used for all Flomatic full port automatic control valves.

FULL PORT

MODEL C
(Flanged or Threaded)

REDUCED PORT GLOBE STYLE

MODEL CF
(Flanged)

ANGLE BODY STYLE

MODEL CA
(Flanged or Threaded)

AIS American Iron and Steel Act - Valves

AVAILABLE SERIES

The below pictures are representative. Specifications subject to change. 

Pressure Reducing
Altitude
Back Pressure Sustaining
Pressure Relief
Surge Arrestor
Pump Control
Pilot Operated Float
Solenoid Control
Flow Control
Hydraulic Check

MODEL C101/CF101

Pressure Reducing Valve

MODEL C101B/CF101B

Pressure Reducing With Low Flow By-Pass

MODEL C103/CF103

Pressure Reducing With External Check Feature

MODEL C104/CF104

Pressure Reducing and Back Pressure Sustaining

MODEL C105/CF105 and C106/CF106

Pressure Reducing With Solenoid Override

MODEL C201/CF201

Modulating Altitude Valve - Single Acting For 1-Way Flow

MODEL C203/CF203

Modulating Altitude Valve and Backpressure Sustaining Valve- Single Acting For 1-Way Flow

MODEL C205/CF205

Non-Modulating Altitude Valve - Single Acting For 1-Way Flow

MODEL C207/CF207

Non-Modulating Altitude Valve with Delayed Opening - Single Acting For 1-Way Flow

MODEL C209/CF209

Non-Modulating Altitude Valve - Double Acting For 2-Way Flow

MODEL C301/CF301

Back Pressure Sustaining

MODEL C306/CF306

Differential Back Pressure Sustaining

MODEL C302/CF302

Back Pressure Sustaining with External Check Feature

MODEL C303/CF303 and C304/CF304

Back Pressure Sustaining with Solenoid Override
(303 Energize to Open) (304 Energize to Close)

MODEL C401/CF401

Pressure Relief Valve

MODEL C501/CF501

Surge Arrestor

MODEL C601/CF601

Pump Control Valve - Single Chamber

MODEL C611/CF611

Pump Control Valve - Dual Chamber with Internal Drop Check 

MODEL C621/CF621

Deep Well Pump Control Valve

MODEL C701/CF701

Float Valve - Horizontal (Modulating)

MODEL C705/CF705

Float Valve - Vertical (Non-Modulating)

MODEL C801/CF801 & C802/CF802

Solenoid Control Valve 
(801 Normally Closed) (802 Normally Open)

MODEL C1001/CF1001

Hydraulic Check Valve

MODEL C901/CF901

Max Rate of Flow Control Valve

MODEL C902/CF902

Max Rate of Flow and Pressure Reducing

MODEL C903/CF903 & C904/CF904

Max Rate of Flow with Solenoid Override
(903 Normally Open) (904 Normally Closed)

FLOMATIC

CONTROL VALVES

An array of options to meet your specifications.
Contact Flomatic Today 800-833-2040

Flomatic Corporation 
15 Pruyn’s Island Drive Glens Falls, NY 12801

800-833-2040 | WWW.FLOMATIC.COM